Ignition
To make your own trigger kit harness
€5.95
Your Online Shopping Destination
Opening Hours10AM - 6PM
Your Online Shopping Destination
View Left Column
1916 products
Grid
Grid-2
List
List-2
Catelog
Ignition
To be used on the CAM plate or any DIY project Instructions
€77.35
Ignition
To be used on the CAM plate or any DIY project Instructions
€77.35
Cylinder Head
This well-engineered piece of gear is specifically designed to maximize fluid flow out of the back of the Nissan RB cylinder head where it needs it most.
Everyone has seen an aftermarket head drain, but this ticks all the boxes, this new PRP unit allows oil drainage to the left or the right or both, which works well for the dry-sump user. <a...
€299.00
Ignition
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power
RBLOOM2 RB25 - 7pin igniter delete small 2pin grey power
RBLOOM3 R33 GTR - 6pin igniter delete small 2pin black power ...
€179.00
Ignition
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power
RBLOOM2 RB25 - 7pin igniter delete small 2pin grey power
RBLOOM3 R33 GTR - 6pin igniter delete small 2pin black power ...
€649.00
Ignition
RBLOOM1 R32 GTR - 6pin igniter delete big 3pin grey power
RBLOOM2 RB25 - 7pin igniter delete small 2pin grey power
RBLOOM3 R33 GTR - 6pin igniter delete small 2pin black power ...
€459.00
Camshafts
Specially designed to work with PRP twin can trigger kits, usually used when running the factory timing covers.
Will block the hole left when using PRP cam trigger kits if you wish to run one.
The best looking trigger kit on the market will still look fantastic with this little anodized CNC 6061 accessory to compliment your trigger...
€35.70
Camshafts
To run mechanical fuel pump kit or trigger Kit
Standard CAS or your existing aftermarket trigger
This piece of CNC machined billet alloy is a nice addition to your expensive engine bay
Benefit of being able to adjust your cam gear without the removal of the crank angle
Works with all known aftermarket trigger kits and bolt-on upgrades as well as any...
€179.00
Cylinder Head
SPECIAL ORDER
Custom Billet Rocker covers, a nice clean tidy look for your race or street car
Few options with breathers being -10AN and 1/2″ NPT
Any colour including silver, black, grey, blue, Gold, and of course purple
For Dry or Wet...
€916.00
Fuel
Billet sensor manifold to fit 1/8 10NPT sensors
Coolant, Fuel, Oil, Manifold, & Boost engraved onto the face
The sensor manifold is fully designed and manufactured at our facility here in Australia using the latest Japanese CNC technology to deliver you Fabtech quality
€90.00